Specified circular
saws for bronze and brass "BW"
tooth
Circular
Saws in Hardening Steel , specifies for
the cutting of bronze and brass. The manufacturer
of all the range with the increasing flange
allow to the circular saw absorbs better
the vibrations due to a very strongly advances.
This technical characteristic reduces the
breaking risk. The more common shape tooth
is “BW”. The range includes
circular saws between diameter 175mm. and
diameter 275mm with thickness from 1.2mm
to 2.0mm. with variables increasing.
The standard finish
of all the range is NEUTRO or ANTIGRIPANTE.
It can be supplied with a P.V.D. coating
((Physical Vapour Deposition) TiAlN and
CrN, specifics for the cutting of bronze
and brass.
Specific circular
saws for pipes "BW" tooth
Circular
Saws in Hardening Steel and super Hardening
Steel specifics to cut pipes from diameter
10mm to diameter 325mm, with wall thickness
of 2 mm. to 10mm. in normal Steel or highly
alloy (inox).
The range includes circular
saws of diameter 63mm., diameter 68mm. and
75 diameter with thickness of 1.2mm, 1.6mm.
and 2.0mm. and with a “BW” tooth.
The standard finish of
all the range it is NEUTRO.
It can be supplied with a P.V.D.
coating ((Physical Vapour Deposition).
Circular saws
specifics for screw slotting saws "A"
tooth
Circular
Saw Blades in Hardening steel and super
hardening steel for cutting heads screws
in all the type of steel and alloy. The
manufacturer of the circular saw plane (without
central flange) and with a shape tooth “A”.
The range includes
circular saws Æ 80mm., 100mm. and
Æ 125mm., with a thickness of 0.7mm
to 2 mm. in decimal increments.
The standard finish of
all the range it is NEUTRO.
We can supply it with a P.V.D. coatings
(Physical Vapour Deposition).
Specific circular
saws for jewerelly "A" tooth
Circular
Saws Hardening Steel and super Hardening Steel
for the cutting and work of jewellery and
BISUTERIA. The manufacturer of the circular
saw it is conical (with flange) and with a
number of tooth low to the mm. of the pitch
(<P1) and tooth “A”.
The range includes
circular saw blades from Æ 40mm. and
Æ 63mm. with thickness of 0.15mm to
1mm. with decimal and hundredth increments
.
The standard finish of
all the range it is NEUTRO.
It can be supplied with PVD coatings
(Physical Vapour Deposition).
Inscrita
en el Registro Mercantil de Zaragoza, Tomo 292 del Libro de Sociedades
Folio 234, Hoja Z-4442. Inscripción 1» C.I.F.- A-50049865
